ATTENTION:
OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DEVICES
Removal/Installation of Hard Drive -
FORCE EVO (all models)/EVO Wallette/Elite Edge
Troubleshooting Information - Removal/Installation of Hard Drive -
FORCE EVO (all models)/EVO Wallette/ Elite Edge
Megatouch FORCE Technical Reference Manual
Hard Drive Removal
1. Turn off and unplug the game.
2. Unlock and open the CPU section.
3. Remove the 3 screws securing the hard drive mounting bracket to the game, then remove the
hard drive assembly until you’re able to disconnect the hard drive power connector and the
hard drive ribbon cable running to the motherboard. See Figure 1.
4. Remove the 4 screws and shoulder washers fastening the hard drive to the mounting plate.
See Figure 1.
Hard Drive Installation
1. Fasten the new hard drive to the mounting plate with the 4 screws and shoulder washers. See
Figure 1.
2. Connect the power connector and the ribbon cable to the hard drive, then fasten the hard drive
assembly in the game with the 3 screws. See Figure 1.
3. Close and lock the CPU section.
4. Plug in and turn on the game.